Technical Data

Basic Device DINEMO-II

• Base unit in 19"-rack with wide input range power supply unit (85 - 264 V AC) and standard Ethernet 100BaseT-interface

• 8 and/or 16 (optional) analogues output signals ±10, ±7.5, ±5 Volt, 12 bit converter resolution, with max. 0.1 ms temporal resolution (available at isolated BNC-sockets at the front plate of the module). The analogues signals are NOT potential-isolated and have common ground.

• 16 digital feedback channels (optional) for the monitoring of max. 16 contacts of an attached protection relay or power system controller. Transmission of the contact states (test signals with TTL-levels) with the help of an optical isolated 16 bit measurement adapter via 3 m fiber-optic cable to the digital feedback card of the DINEMO-II. Indication of the 16 contact states via 16 LED bars at the front plate of the digital Feedback-module

• 4 analogues feedback channels (optional), max. ±10 V, 12 bit converter resolution, for the synchronous detection of analogues feedback signals without potential-isolation

• Max. temporal resolution of the in and output signals: 0.15 ms (this value indicates therefore also the smallest possible simulation step in closed loop - mode)

• Dimensions: 520 x 210 x 400 mm (width x height x depth)

• Total weight (with 16 analogues channels) : approx. 15 kg

• WEEE registration number: DE 16546929

Power Amplifiers

• Power amplifiers by different manufacturers may be connected, recommended CMS 156 by OMICRON or amplifiers by TECHRON.